| 复合门、烤漆门、免漆门等各种门的工艺对比！ |
| 添加时间：2017/9/1 17:59:19 浏览次数： |
| 原木门 The original wood door 原木门用料全部是表里如一的同一种材料，无齿接无贴皮，原料是直接用木头破开的板子，选料有讲究，价格较高。在木门的加工过程中，要对木材进行一系列的脱水、烘干以及力学性能的处理，能够保证木门的稳定性。原木门是实木门系列的高端产品，界限不十分明显。制作选材较难，制作技术很高，使用的油漆技术也不一样。低档木材加工在2000左右，高档的超过4000，更高者可能过万。 The original wooden door material is all the same kind of material, without teeth or without pasting, the raw material is the board that is broken open by wood directly, the material of material is exquisite, the price is higher. In the process of wood door processing, a series of dehydration, drying and mechanical properties can be treated to ensure the stability of the wood door. The original wooden door is the high-end product of real wood door series, the line is not very obvious. It is difficult to make the selection material, the production technology is very high, and the paint technique used is different. Low-grade wood processing in about 2000, high-grade over 4000, the higher may be over 10,000. 实木门 Real wood door 实木门选用的材料也是纯木头，但是不是大料，而是实木集成材（实木齿接材，实木指接材），一般是松木、楸木、橡木等。原木门或实木门在上下两端基本可以看到区别，原木门门边截面为原木独条，完整无分解痕迹；实木门门边底部截面一般有分解集成材胶痕。严格意义上来说，原木门属于实木门，可以看做是实木门里最高端的产品。 The material used in solid wood door is also pure wood, but not the material, but the solid wood set (solid wood teeth, solid wood finger), usually pine, mountain wood, oak and so on. The original wooden door or solid wood door can be seen from the lower and lower sides, the original wooden door edge section is the original wooden bar, the complete unbroken trace; The bottom section of the solid wood door is usually broken up. In strict sense, the original wooden door belongs to the solid wooden door, can be regarded as the highest end product in the real wood door. 实木复合门 Solid wood composite door 实木复合门的门芯多以松木、杉木或进口填充料等粘合而成，外贴密度板和实木木皮，经高温热压后制成，并用实木线条封边。一般高级的实木复合门，其门芯多为优质白松，外表则为实木单板。复合门是目前市面上最多的一种门，品质参差不齐，低档的600-900元，高档的1200-2500元。 The door core of the solid wood composite door is made of pine, fir or imported fillings, and it is made out of the density plate and solid wood veneer. It is made after high temperature and hot pressure and is sealed with solid wood line. General advanced solid wood compound door, its door core is high quality white pine, the appearance is solid wood veneer. Compound door is one of the most currently on the market door, quality is uneven, low grade 600-900 yuan, high-grade 1200-2500 yuan. 环保室内门 Environmental protection indoor door 环保室内门是一种新型的环保门，以精细木粉和医用级树脂粉为主要原料，通过采用模塑化工艺，在高温高压状态下挤出，一次成型，整个过程无需胶粘拼接，杜绝开裂变形，是真正的零甲醛室内门。环保室内门热转印工艺的价格在1000-1500元，烤漆的在1600-2200元。 Environmental indoor door is a new kind of environmental protection, with fine wood powder and medical level tree powder as the main raw material, through the adoption of molding process, in the condition of high temperature and high pressure extrusion, a molding, the whole process without adhesive joining together, eliminate cracking deformation, is a true zero - formaldehyde indoor door. The price of the green indoor door heat transfer printing process is 1000-1500 yuan, and the painting is at 1600-2200 yuan. 钢木门 Steel door 中间用指接木做好长方形框架、中间放蜂窝纸（蜂窝纸为隔音层）两面加钢板（两面钢板用发泡胶粘合在蜂窝纸上），钢板表面为高温复塑PVC做成颜色，钢板厚度为0.6毫米，门扇整体厚度为4.5公分。4.5公分门扇小面是左右使用钢板收边，上下使用高分子面板收边。价格一般在400-600元。 Refers to between inoculation completes the rectangle frame, middle honeycomb paper honeycomb paperboard for sound insulation layer () two sides with steel plate (both sides on the honeycomb paper plate with foam glue), surface of steel plate is made after high temperature plastic PVC color, thickness of steel plate is 0.6 mm, door leaf total thickness of 4.5 cm. 4.5 cm door fan small side is about to use steel plate to close, up and down use macromolecule panel to close. The price is usually 400-600 yuan. 模压门 Moulded door 模压门是一种比较低端的实木复合门，以实木做框架，两面用装饰板粘压在框架上，经热压加工制成。夹板模压空心门即模压门门芯、框架多以松木为主，款式单一，结构简单，门型受模板形状限制。表面粘贴刷上清漆的木皮或木纹纸，保持了木材纹理的装饰效果，同时也可进行面板拼花。价格一般在200-400元。 The moulded door is a kind of low-grade solid wood composite door, which is made of solid wood, and the two sides are glued on the frame with decorative plates, which are made by hot pressing. The clamping hollow door of the sandwich plate is the mold door core, the frame is mostly pine wood, the style is single, the structure is simple, the door type is restricted by the shape of the template. The surface is brushed with lacquer wood or grain paper, maintaining the decorative effect of wood texture, and also can be used for panel spelling. The price is usually 200-400 yuan. |
| 上一页 铝木复合门怎么样 |
| 下一页 推拉门，门里门外都是景 |
Copyright © 技术支持：遨游网络