北京静音空压机良心厂

Measurement and design of special-shaped doors and windows

建筑上所说的异形窗，就是在同一平面内不规则的几何形状的窗户和不在同一平面内的门窗户。

The special-shaped windows in architecture are windows with irregular geometry in the same plane and doors and windows that are not in the same plane.

异形窗，结构复杂，形式各异，设计独特，韵味非凡。

The special-shaped windows are complex in structure, different in form, unique in design and unusual in flavor.

异型窗无论从加工和安装上来讲难度相对较高，材料浪费较多，因此异型窗正是考验门窗工艺真功夫。

The special-shaped windows are relatively difficult to process and install, and waste materials are much more.

作为门窗生产商关心的，当然是如何在节省型材成本的基础上，又设计出优质的异形门窗，因此，在前期门窗测量及型材算料环节，就显得格外重要。

As a door and window manufacturer concerned, of course, how to save the cost of profile, and design a high quality and special shape and window, therefore, in the early stage of door and window measurement and material calculation is particularly important.

作为消费者，谁都想拥有经自己原创设计的一扇心灵门窗，于是，各种奇形创新的门窗设计，也深受广大业主朋友们的关注！

As a consumer, everyone wants to have their own original design of the door and window of the mind, so the design of all kinds of strange and innovative doors and windows is also deeply concerned by the friends of the owners!

异形门窗的测量

Measurement of special-shaped doors and windows

半圆形门窗的测量：测量出半圆形洞口的直径或半径和圆弧最远点到可确认定位线的垂直距离。

Measurement of semicircular doors and windows: measuring the diameter or radius of a semi-circular opening and the vertical distance from the farthest point of the arc to the confirmation location line.

圆形门窗的测量：测量出圆形洞口的直径或半径。

Measurement of circular doors and windows: measure the diameter or radius of the round hole.

弧形门窗的测量：测量出弧形洞口上至少三个特殊点（可确认定位点）到可确认定位线的垂直距离。

Measurement of arc doors and windows: measure the vertical distance of at least three special points on the arc hole (the confirmation point) to the confirmation location line.

直边形门窗（各边均为直线形式）的测量：测量洞口上所有边拐点到可确认定位线的垂直距离，也可以采用长度（或宽度）与角度混合使用的方式，但所列数据要详细，确保其尺寸唯一性。

The measurement of a straight side door and window (all sides in a straight line): measuring the vertical distance of all side inflection points on the hole to the identifiable location line and the way of mixing the length (or width) with the angle, but the data in detail should be detailed to ensure the uniqueness of the size.

对于洞口侧面为斜面（即洞口相对两侧面不平行），应在向用户了解门窗安装时在洞口内进深量，并测量相应安装部位尺寸。

For the side of the hole, the side of the hole is not parallel to the two sides of the hole. The depth of the hole in the hole should be understood to the user when the door and window are installed, and the size of the corresponding installation position should be measured.

复杂异形洞口的测量可根据实际情况或需要做洞口样板。

The measurement of complex special-shaped openings can be made according to actual conditions or needs.