| 夹板门 |
| 添加时间：2020/8/17 17:15:49 浏览次数： |
| 夹板门，普通夹板门以木材、多孔板、高密度板等作门芯，门的两面平整部分用装饰面板粘压在框上，凹槽部分用木皮或纸皮粘贴，经加工而成。这种门质量轻、价格低，但受工艺所限，表面色差较大，门四周只能贴木皮、纸皮或钉上木条封边。 Wood, porous board and high density board are used as the core of ordinary plywood door. The flat parts on both sides of the door are glued and pressed on the frame with decorative panel, and the groove part is pasted with wood or paper and processed. This kind of door is light in weight and low in price, but limited by the technology, the surface color difference is large, and the door can only be pasted with wood veneer, paper or nailed with wood strips for edge sealing. 夹板门简洁光滑，合乎清洁卫生要求，惟胶合板视胶的质量而定，通常受潮易脱胶，日晒易起裂，不宜用外门。如果是做混水效果的夹板门，可以直接用三夹板贴面，但现在的三夹板质量都不太好，所以现在多用红榉或红胡桃代替，一来这两种饰面板价格便宜，比三夹板贵不了多少，二来饰面板的平整度要比夹板好多了，油漆施工也容易。 Plywood door is simple and smooth, in line with the requirements of cleaning and sanitation, but plywood depends on the quality of the glue. It is easy to degumm when it is damp and easy to crack in the sun. It is not suitable to use the outer door. If it is a plywood door with water mixing effect, three plywood can be directly used for veneering, but the quality of the three plywood is not good now, so red beech or red walnut are often used instead. On the one hand, the price of these two veneers is cheap, which is not much more expensive than that of plywood. Secondly, the flatness of the veneer is much better than that of plywood, and the paint construction is also easy. |
| 上一页 推拉门已经被更多的运用到家装当中 |
| 下一页 实木复合门的特点 |
Copyright © 技术支持：遨游网络